Language
Excellent performance and cost-effective. Comparable to the quality of Europe, America and Japan.
Selection of 0.2μm imported ultra-micro carbide materials, high-speed processing of high hardness material life longer.
Higher surface finish when processing optical moulds, better wear resistance when processing high hardness materials.
Special tool design, high precision tolerance and quality control.
Oil mist, trace lubrication and air cooling are recommended.
Semi-finishing and finishing.
| Applicable Table for Millable Materials√fit as a pudding for a friar's mouth〇appropriate | |||||||||||||
|
carbon steel alloy steel |
Pre hardened steel, hardened steel | Stainless steel | cast iron | copper | aluminium | graphite | titanium alloy | Heatresistant alloy | plastic | ||||
| 40HRC | 50HRC | 55HRC | 65HRC | ||||||||||
| 〇 | √ | √ | √ | 〇 | 〇 | 〇 | 〇 | 〇 | |||||
| D ≤four~-0.01 4<D≤ 6 0~-0.012 6<D≤ 100~-0.015 10<D≤ 20 0~-0.018 |
|
Blade diameter D |
Blade length H |
Stem diameter D |
Total length L |
Illustration |
| 1 | 2.5 | 4D | 50L | A |
| 1.5 | 3.7 | 4D | 50L | A |
| 2 | 5 | 4D | 50L | A |
| 2.5 | 6 | 4D | 50L | A |
| 3 | 7.5 | 3D | 50L | B |
| 3 | 7.5 | 4D | 50L | A |
| 4 | 10 | 4D | 50L | B |
| 2 | 5 | 6D | 50L | A |
| 3 | 7.5 | 6D | 50L | A |
|
4 |
10 | 6D | 50L | A |
| 5 | 12.5 | 5D | 50L | B |
| 5 | 12.5 | 6D | 50L | A |
| 6 | 15 | 6D | 50L | B |
| 6 | 15 | 6D | 75L | B |
| 6 | 15 | 6D | 100L | B |
| 8 | 20 | 8D | 60L | B |
| 8 | 20 | 8D | 75L | B |
| 8 | 20 | 8D | 100L | B |
| 10 | 25 | 10D | 75L | B |
| 10 | 25 | 10D | 100L | B |
| 12 | 30 | 12D | 75L | B |
| 12 | 30 | 12D | 100L | B |
| 14 | 35 | 14D | 100L | B |
| 16 | 40 | 16D | 100L | B |
| 16 | 40 | 16D | 150L | B |
| 20 | 50 | 20D | 100L | B |
| 20 | 50 | 20D | 150L | B |
person: Mr. Gong
Tel: +86 0769-82380083
Mobile phone:+86 15362883952
Email: info@jimmytool.com
Website: www.jimmytool.com
