The 5xD Solid Carbide Drill features a 0.6 μm grain-size carbide substrate and a PVD coating. Its standardized shank diameter provides a consistent clamping interface, while the cutting diameter can be selected according to the required hole size. Designed for precision drilling and batch production, it is suitable for low- and medium-carbon steel, cast iron, stainless steel, and titanium alloys.
When a production line requires different hole diameters, selecting a drill involves more than matching the cutting edge to the drawing. The shank must also fit the available toolholding system, and the drill must provide sufficient reach for the required hole depth.
The 5xD Solid Carbide Drill combines a standardized shank design with cutting diameters selected according to drilling requirements. This configuration supports consistent toolholding and provides a practical option for production applications that need deeper holes than a shorter drill can accommodate.
Its 0.6 μm grain-size carbide substrate balances hardness and toughness. A PVD coating completes the tool specification for drilling low-carbon steel, medium-carbon steel, cast iron, stainless steel, and titanium alloys.
The drill’s shank diameter follows a standardized size, while its cutting diameter varies according to the required hole size. This separates the toolholding requirement from the hole diameter selection.
For manufacturing teams, a consistent shank interface can simplify tool selection when the available holder supports the required shank size. The cutting diameter can then be matched to the component drawing without assuming that the shank must have the same diameter as the finished hole.
Before ordering, verify the actual shank dimension against the spring collet or other compatible holder. The available cutting-diameter range and shank dimensions should be confirmed using the product specification.
The 5xD designation generally describes a nominal drilling depth of five times the drill diameter. It is relevant when the required hole is deeper than the practical range of a shorter drill.
For example, a nominal 5xD depth ratio corresponds to a depth of 25 mm for a 5 mm diameter drill. This is an illustrative calculation of the ratio, not a verified usable-depth specification for a particular product size.
Choose the drill according to the hole depth on the part drawing, not the designation alone. The actual available cutting length and maximum usable drilling depth should be checked before machining.
The drill uses a carbide substrate with a specified grain size of 0.6 μm. According to the product specification, the substrate is selected to balance hardness and toughness.
Both characteristics matter in drilling. The tool must maintain a suitable cutting edge while withstanding the mechanical demands of the operation. The final result also depends on the workpiece material, tool diameter, machine condition, toolholding, and cutting parameters.
Grain size alone does not establish a guaranteed tool life or a specific level of drilling accuracy. Match the drill to the complete machining requirement rather than using one material characteristic as the sole selection criterion.
The drill features a PVD coating. The exact coating composition has not been specified, so a particular coating chemistry or temperature rating should not be assumed.
When comparing drills for different workpiece materials, check the coating details alongside the carbide substrate and the manufacturer’s cutting recommendations. The correct selection depends on the complete tool specification and the intended application.
The supplied product specifications list five material groups for this drill:
These materials do not share the same cutting behavior. Speeds, feeds, and other operating parameters should be selected for the specific material and drill size rather than applied uniformly.
The main selection difference between these depth designations is the required drilling reach.
| Selection Factor | 3xD Drill | 5xD Drill |
|---|---|---|
| Nominal depth ratio | 3 times drill diameter | 5 times drill diameter |
| Intended reach | Shorter holes | Deeper holes |
| Main selection question | Does the available depth meet the drawing? | Does the application require the additional reach? |
| Before ordering | Verify the usable drilling depth | Verify the usable depth and available cutting length |
For holes that fit within a shorter drill’s usable depth, a 3xD tool may be sufficient. Where the drawing calls for a deeper hole, a 5xD version provides a higher nominal depth ratio.
The depth designation alone does not prove that one drill will machine faster, achieve a tighter tolerance, or last longer. These outcomes depend on the actual tool geometry, workpiece, machine, and cutting conditions.
Before choosing a 5xD drill, confirm the following information:
For production applications, confirm the tool dimensions before standardizing a drill across multiple parts or machines. This helps prevent a mismatch between the hole specification and the available tooling.
| Parameter | Specification |
|---|---|
| Product Type | Solid Carbide Drill |
| Product Designation | 5D |
| Carbide Grain Size | 0.6 μm |
| Substrate Characteristics | Balances hardness and toughness |
| Coating | PVD |
| Shank Design | Standardized shank diameter |
| Cutting Diameter | Selected according to the required hole size |
| Primary Workpiece Materials | Low-carbon steel, medium-carbon steel, cast iron, stainless steel, titanium alloys |
| Intended Applications | Precision drilling and batch production |
Specific cutting diameters, shank diameters, cutting lengths, overall lengths, coating composition, hole tolerances, and cutting parameters should be confirmed against the actual product specification.
It generally refers to a nominal drilling depth of five times the drill diameter. The usable depth for the actual product should be confirmed against the manufacturer’s dimensional specifications.
A standardized shank provides a defined clamping interface for compatible toolholders. It can simplify selection across different cutting diameters when those tools share the required shank size.
The supplied specifications list low-carbon steel, medium-carbon steel, cast iron, stainless steel, and titanium alloys. The appropriate drill size and cutting conditions depend on the actual workpiece material and machining requirements.
Provide the required hole diameter and depth, workpiece material, dimensional tolerance, and compatible shank size. A part drawing can help clarify the geometry and the required drilling depth.
To identify a suitable drill for your production application, send JimmyTool your part drawing or hole specifications. Include the workpiece material, required hole diameter, drilling depth, tolerance, and toolholder requirements.
These details help match the cutting diameter and shank configuration to your application before the tool is selected.