CC-AK aluminum turning inserts are designed for machining aluminum alloys, copper and other non-ferrous metals, as well as suitable plastics. Featuring an 80° rhombic shape, a 7° clearance angle and G tolerance class, these inserts provide a positive cutting geometry for non-ferrous metal turning applications.
The 80° insert geometry offers a practical balance between cutting-edge support and machining accessibility. It is suitable for general turning operations where a stable cutting edge and consistent insert positioning are important.
Aluminum alloys and copper can be prone to material adhesion during machining. Plastic materials also require suitable cutting geometry to avoid excessive cutting resistance and poor surface results.
CC-AK inserts are designed for these non-ferrous machining conditions. Their 7° positive clearance angle provides clearance between the insert flank and the machined surface, while the positive geometry supports a lighter cutting action.
This makes CC-AK a suitable option for machining:
The appropriate insert selection still depends on the workpiece material, cutting operation and required surface finish.
CC-AK inserts feature an 80° rhombic shape. Compared with sharper-angle profiling inserts, the larger included angle provides stronger support around the cutting corner.
This geometry makes the insert suitable for common turning operations, including:
The 80° shape is less suited to reaching very narrow grooves and complex internal profiles than 55° or 35° insert geometries. Tool access and holder clearance should be checked before selecting the insert.
CC-AK combines a 7° clearance angle with a G tolerance class. These features describe different aspects of the insert and should be considered separately.
7° positive clearance angle
The clearance angle provides space between the insert flank and the machined surface. A positive-clearance design can help reduce flank contact and support lower-resistance cutting when the insert is used with a compatible toolholder.
G tolerance class
The G tolerance class refers to dimensional accuracy under the applicable insert designation standard. It is a dimensional classification, not a direct measurement of surface finish, cutting-edge sharpness or machining precision.
For applications requiring specific dimensional consistency, check the manufacturer’s dimensional drawings and tolerance specifications for the exact insert size.
CC-AK inserts are intended for non-ferrous metal and suitable plastic machining.
| Workpiece material | Typical applications |
|---|---|
| Aluminum alloys | Turning aluminum components, housings and machined parts |
| Copper | Machining copper parts and components |
| Other non-ferrous metals | Turning compatible non-ferrous workpieces |
| Plastics | Machining suitable engineering plastic components |
Actual machining suitability depends on the material grade, insert geometry, machine rigidity and cutting conditions. For demanding applications, confirm compatibility before production use.
Choosing the correct insert requires more than matching the insert shape. Consider the following factors before ordering:
These details help determine whether the CC-AK geometry is suitable for the intended application.
Looking for CC-AK inserts for aluminum alloy, copper or plastic machining?
Contact JimmyTool with your required insert designation, dimensions, workpiece material and machining application. If available, include a toolholder model or technical drawing.
Our team can help check product compatibility and provide the relevant specifications and quotation for your requirements.