CNMG Cermet Turning Inserts for Steel Finishing

CNMG cermet turning inserts are designed for high-speed finishing and semi-finishing of steel components. Featuring an 80° rhombic negative geometry and a double-sided design, these inserts provide multiple usable cutting edges and good cutting-edge support.

Product Details

The cermet cutting material offers high wear resistance and low material affinity, helping maintain edge condition and reduce material adhesion during machining.

CNMG cermet inserts perform best in stable, continuous cutting operations with uniform machining allowances, a rigid machine setup and controlled cutting forces. They are particularly suitable for applications where consistent surface finish and dimensional stability are important.

Why Choose CNMG Cermet Turning Inserts?

CNMG cermet inserts combine the structural advantages of an 80° negative insert with the wear characteristics of cermet.

Key advantages include:

  • High wear resistance: Helps maintain cutting-edge condition during high-speed finishing.
  • Low material affinity: Reduces the tendency of workpiece material to adhere to the cutting edge.
  • Double-sided design: Provides multiple usable cutting edges for better insert utilization.
  • 80° rhombic geometry: Offers a stable cutting corner for general turning applications.
  • Consistent surface quality: Supports smooth finishing when machining allowances and cutting conditions are stable.

These characteristics make CNMG cermet inserts a suitable choice for production environments that prioritize finishing quality and predictable tool performance.

80° Double-Sided Geometry for Stable Turning

The CNMG insert features an 80° rhombic shape with a negative clearance geometry. Its double-sided construction allows both sides of the insert to be used, providing multiple available cutting edges.

The relatively large included angle provides good support around the cutting corner. This makes CNMG a practical geometry for stable external turning and facing operations.

Typical applications include:

  • External turning of steel components
  • Facing and shoulder turning
  • High-speed finishing
  • Semi-finishing with consistent machining allowances
  • Continuous production machining

The actual number of usable cutting edges depends on the insert design and compatible toolholder. Confirm the complete insert designation before selecting a replacement.

Cermet Material for High-Speed Finishing

Cermet combines ceramic hard phases with a metallic binder. Its high hardness and wear resistance make it suitable for finishing applications where cutting-edge stability and surface quality are important.

Compared with tougher carbide grades, cermet generally offers lower fracture toughness. It is therefore better suited to stable cutting conditions than operations involving severe mechanical impact.

For CNMG cermet inserts, the main benefits are:

Wear resistance

Cermet helps resist cutting-edge wear during continuous machining, supporting more consistent tool performance over the finishing operation.

Reduced material adhesion

Its low affinity to many ferrous workpiece materials helps reduce material adhesion at the cutting edge.

Surface finish

When the machining allowance is uniform and the machine setup is rigid, the insert can support a smooth and consistent surface finish.

These benefits are most effectively realized when the cutting process remains stable and the selected grade matches the workpiece material.

Recommended Cutting Conditions

CNMG cermet inserts are intended primarily for high-speed finishing and semi-finishing. Their performance depends on maintaining a stable cutting process.

Consider the following factors:

  • Machining allowance: Keep the remaining material allowance reasonably uniform to avoid sudden changes in cutting load.
  • Machine rigidity: Use a rigid machine, secure workholding and a suitable toolholder to reduce vibration.
  • Cutting speed: Select a speed appropriate for the workpiece material and specific cermet grade.
  • Feed rate and depth of cut: Match both to the insert geometry, nose radius and finishing requirements.
  • Cutting continuity: Prioritize continuous cutting rather than operations involving repeated impact.

There is no single cutting speed or feed rate suitable for every CNMG cermet grade. Use the product-specific cutting recommendations when setting production parameters.

Can CNMG Cermet Inserts Be Used for Interrupted Cutting?

CNMG cermet inserts are best suited to continuous cutting. Their wear resistance and finishing performance are most useful when the cutting edge experiences relatively consistent loads.

Cermet has lower impact toughness than many carbide grades. During interrupted cutting, repeated entry and exit impacts can cause edge chipping or insert breakage.

For applications involving light interrupted cuts, consider a suitable TM-style chipbreaker with improved edge strength. The actual chipbreaker must be confirmed for the specific insert grade and workpiece material.

For heavy interrupted cutting or strong impact conditions, a tougher carbide grade is generally a more appropriate option.

How to Select the Right CNMG Cermet Insert

Before selecting a CNMG cermet insert, evaluate the workpiece and cutting conditions.

  • Workpiece material: Identify the steel grade and hardness.
  • Machining stage: Confirm whether the operation is finishing or semi-finishing.
  • Cutting continuity: Specify whether the operation is continuous or involves light interruptions.
  • Insert designation: Confirm the complete CNMG size, nose radius and chipbreaker code.
  • Cermet grade: Select a grade suitable for the workpiece material and required cutting conditions.
  • Machine rigidity: Check machine stability, workholding and toolholder compatibility.
  • Surface requirements: Provide the required surface finish and dimensional tolerances.

These details help determine whether a standard finishing chipbreaker or a more edge-resistant TM-style option is appropriate.

Request a Quote for CNMG Cermet Turning Inserts

Looking for CNMG cermet inserts for high-speed steel finishing or semi-finishing?

Contact JimmyTool with your complete insert designation, workpiece material, machining operation and cutting conditions. If the application involves light interrupted cutting, include details about the interruption and current chipbreaker configuration.

You can also submit a technical drawing or existing insert specification to help verify compatibility and request a quotation.

Request A Quote

Tell Us What You Need