LOGU030310ER High-Feed Milling Insert for Low Cutting Forces

The LOGU030310ER high-feed milling insert features a double-sided design with four usable cutting edges. Its positive-rake geometry and convex cutting edge help reduce cutting resistance, making it a suitable option for shallow-depth, high-feed milling where tool rigidity and vibration control are important. It is particularly relevant to small-diameter cutters, long-overhang setups and machines with moderate rigidity.

Product Details

When milling with a small-diameter cutter or a long tool overhang, excessive cutting resistance can contribute to vibration and tool deflection. These issues may affect machining stability and the accuracy of the finished surface.

The LOGU030310ER combines positive-rake geometry with a convex cutting edge to promote a smoother cutting action and lower cutting forces under suitable conditions. This makes it worth considering when a conventional, heavier-cutting approach places too much load on the tool or machine setup.

For best results, match the insert to the cutter body, workpiece material and available machine rigidity.

Designed for Shallow-Depth, High-Feed Milling

The LOGU030310ER is intended for high-feed machining rather than deep axial cutting. Its typical maximum axial depth of cut (Ap) falls within approximately 0.3–1.0 mm, depending on the insert configuration and compatible cutter system.

A shallow depth of cut allows the machining strategy to prioritize a higher feed rate while keeping cutting forces manageable. This can be useful for roughing operations where stable material removal is more important than taking a deep cut in a single pass.

Before increasing the feed rate, verify the recommended cutting data for the exact insert grade and cutter. The achievable feed also depends on workpiece material, cutter diameter, engagement, spindle capability and setup rigidity.

Four Usable Cutting Edges to Help Control Tooling Cost

The double-sided insert provides four usable cutting edges. This design helps reduce the effective cost per cutting edge and can make the insert attractive for recurring roughing operations.

When comparing insert options, consider more than the initial purchase price. The number of usable edges, edge life, machining stability and insert-change frequency all affect the overall cost of production.

Check Compatibility Before Selecting the Insert

The LOGU030310ER should be matched to a compatible high-feed milling cutter. Before ordering replacement inserts, confirm the complete insert designation and the cutter pocket geometry.

For applications involving small-diameter cutters or long overhangs, also consider:

  • Tool overhang: Longer overhangs generally make the setup more sensitive to deflection and vibration.
  • Machine rigidity: A lower cutting load may help, but the machine, spindle and toolholder still need to provide adequate support.
  • Axial depth of cut: Keep Ap within the range specified for the exact insert and cutter combination.
  • Feed rate: Set feed per tooth according to the workpiece material, insert grade and machining conditions.

This selection process helps avoid applying a high-feed insert to a cutting strategy that requires a deeper axial engagement than the insert is intended to handle.

Select a Grade for Your Workpiece Material

Material-specific options are available for different machining applications, including:

  • Carbon steel
  • Stainless steel
  • Titanium alloys
  • Pre-hardened steel
  • Hardened steel
  • Cast iron

The appropriate insert grade depends on the workpiece material, its hardness and the cutting conditions. If you are machining more than one material, identify the primary application so the insert grade can be matched to the actual requirement.

Request a Quote for LOGU030310ER Milling Inserts

To help identify a suitable insert option, provide JimmyTool with the following information:

  • Complete insert designation and required quantity
  • Workpiece material and hardness, if known
  • Compatible cutter model or insert drawing
  • Target axial depth of cut and feed rate
  • Cutter diameter and tool overhang, where relevant

Submit your drawings or specifications to JimmyTool to request a quotation for LOGU030310ER high-feed milling inserts.

Request A Quote

Tell Us What You Need