TN-AK inserts are designed for turning aluminum, copper, and other non-ferrous metals. Their sharp cutting edge, large rake angle, and polished surface are developed to address common machining challenges such as material adhesion, built-up edge (BUE), and poor chip evacuation.
When machining soft and sticky materials, a sharp cutting edge helps produce a cleaner cut, while the large rake angle supports lighter cutting action. The polished insert surface also helps reduce friction between the chip and the rake face, promoting smoother chip flow.
TN-AK is a specialized option for manufacturers machining aluminum alloys and other non-ferrous materials where cutting performance and surface quality are important.
Aluminum and copper alloys can be challenging to machine because some grades tend to adhere to the cutting edge. This may cause built-up edge, unstable cutting conditions, and inconsistent surface finishes.
TN-AK inserts address these challenges through three key design features.
Sharp Cutting Edge for Clean Machining
A sharp cutting edge helps shear soft materials more cleanly instead of pushing or deforming them. This supports smoother cutting and can help reduce burr formation under suitable machining conditions.
Large Rake Angle for Light Cutting
The large positive rake geometry promotes a lighter cutting action and helps reduce cutting resistance. This is particularly useful when machining aluminum and other non-ferrous materials that respond well to sharp, high-rake cutting geometries.
Polished Surface for Better Chip Flow
The polished rake face provides a smoother contact surface for flowing chips. Reduced friction can help limit chip adhesion and built-up edge, while supporting more consistent chip evacuation.
Together, these features make TN-AK suitable for machining materials that are prone to sticking to the cutting tool.
TN-AK inserts are intended for turning applications involving aluminum and other non-ferrous metals.
| Workpiece Material | Typical Applications |
|---|---|
| Aluminum | External turning, facing, and general component machining |
| Aluminum alloys | Turning precision-machined aluminum components |
| Copper | Turning copper parts and other copper-based components |
| Other non-ferrous metals | Machining suitable non-ferrous materials according to grade compatibility |
The actual suitability depends on the workpiece alloy, insert grade, and machining conditions. Confirm material compatibility before selecting an insert for a specific application.
Built-up edge occurs when workpiece material adheres to the cutting edge during machining. It is a common concern when turning soft, adhesive materials such as certain aluminum alloys.
Three aspects of the TN-AK design help address this problem:
These features can help reduce the conditions that contribute to built-up edge. However, they do not eliminate BUE under every machining condition.
Cutting speed, feed rate, depth of cut, workpiece alloy, and coolant use can all influence the final result.
Choosing the right TN-AK insert requires matching the insert specification to the workpiece and machining operation.
1. Identify the Workpiece Material
Confirm whether the material is pure aluminum, a specific aluminum alloy, copper, or another non-ferrous metal. Different alloys have different cutting and adhesion characteristics.
2. Select the Insert Size and Nose Radius
The insert size must match the toolholder. Nose radius should be selected according to the component geometry, required surface finish, and machining conditions.
3. Check the Required Cutting Operation
Consider whether the application involves external turning, facing, or another turning operation. The insert geometry and holder must provide suitable clearance for the intended machining path.
4. Confirm the Insert Grade and Surface Treatment
Check the available grades and whether the insert is uncoated or uses a specific surface treatment. Do not assume that all TN-AK configurations share the same substrate or coating.
5. Optimize Cutting Conditions
Cutting speed, feed rate, depth of cut, and coolant conditions should be selected according to the workpiece alloy and insert specifications. A suitable combination helps maintain stable cutting and consistent surface quality.
Selecting the right TN-AK insert depends on the workpiece alloy, required insert dimensions, nose radius, and machining conditions.
When requesting a quotation, provide the complete insert designation, workpiece material, machining operation, and required specifications. If available, include the component drawing and current cutting conditions.
Submit your drawing or existing insert reference so our team can review your requirements and help identify a suitable TN-AK configuration.