VC-AK inserts are designed for turning aluminum, copper, and other non-ferrous materials, as well as suitable plastics. They feature a 35° rhombic shape, 7° clearance angle, and G tolerance class.
The specialized cutting geometry combines a sharp cutting edge, large rake angle, and polished surface to address common challenges in non-ferrous machining, including material adhesion and built-up edge (BUE).
The 35° insert geometry also provides good access to detailed workpiece contours, making VC-AK suitable for profiling and precision turning applications where cutting-edge sharpness and dimensional consistency are important.
Aluminum and copper are relatively soft materials, but they can create machining difficulties because some grades tend to stick to the cutting edge. Material adhesion may lead to built-up edge, unstable cutting, and inconsistent surface finishes.
VC-AK inserts use several design features to address these challenges.
Sharp Cutting Edge for Cleaner Cutting
A sharp cutting edge helps shear soft materials cleanly and supports a lighter cutting action. This is useful when machining aluminum alloys and copper, where an unsuitable or less sharp edge may encourage material adhesion.
Large Rake Angle for Lower Cutting Resistance
The large positive rake geometry promotes smoother chip formation and reduces resistance during cutting. It is particularly suitable for materials that benefit from sharp, positive cutting geometries.
Polished Surface for Improved Chip Flow
The polished rake face provides a smoother surface for chip movement. This helps reduce friction at the chip-contact area and can limit material adhesion during machining.
Together, these features help create more favorable cutting conditions for aluminum and other non-ferrous materials.
The 35° rhombic shape is an important feature of the VC-AK series. Its pointed geometry provides access to narrow areas and detailed workpiece contours that may be difficult to reach with inserts featuring larger included angles.
Typical applications include:
The pointed insert geometry offers good profile accessibility, but its cutting tip has less support than inserts with larger included angles. It should therefore be selected according to the cutting load and workpiece stability rather than used for heavy roughing by default.
VC-AK inserts are designed for non-ferrous materials and selected plastic machining applications.
| Workpiece Material | Typical Applications |
|---|---|
| Aluminum | External turning, profiling, and precision component machining |
| Aluminum alloys | Contour turning and finishing operations |
| Copper | Turning copper components and shaped parts |
| Other non-ferrous metals | Machining compatible materials according to grade specifications |
| Plastics | Turning suitable plastic components |
Material compatibility should be confirmed against the available insert grade and the specific workpiece. Different aluminum alloys, copper grades, and plastics can have different cutting characteristics.
The VC-AK series combines a specific insert shape, clearance angle, and manufacturing tolerance class.
| Feature | Specification | Machining Relevance |
|---|---|---|
| Insert shape | 35° rhombic | Supports access to detailed profiles |
| Clearance angle | 7° positive | Provides clearance behind the cutting edge |
| Tolerance class | G | Defines dimensional tolerance requirements under the applicable insert standard |
| Cutting edge | Sharp | Supports clean cutting of soft materials |
| Rake face | Polished | Helps reduce chip-contact friction |
| Rake geometry | Large positive rake | Promotes lighter cutting action |
The G tolerance class should not be confused with surface finish or cutting-edge sharpness. These are separate characteristics of the insert.
Selecting a VC-AK insert requires matching its geometry and grade to the workpiece material and machining operation.
1. Confirm the Workpiece Material
Identify whether the component is made from aluminum, an aluminum alloy, copper, or plastic. Material composition affects chip formation, adhesion behavior, and the appropriate insert grade.
2. Choose the Insert Size and Nose Radius
The insert dimensions must match the toolholder. Nose radius should be selected according to the required contour, surface finish, and cutting conditions.
3. Consider the Required Profile
The 35° geometry is suitable for detailed profiling and narrow contour features. Check the component drawing to ensure the insert can reach the required machining areas without interference.
4. Confirm Grade and Material Compatibility
Check the available carbide grade and surface treatment for the intended workpiece. Do not assume that every VC-AK configuration has identical material compatibility.
5. Match Cutting Conditions to the Application
Cutting speed, feed rate, depth of cut, and coolant conditions should be selected according to the workpiece material and insert specifications. Stable machining conditions help maintain consistent cutting performance and surface quality.
Choosing the right VC-AK insert requires matching the 35° geometry, insert dimensions, nose radius, and grade to the machining application.
When requesting a quotation, provide the complete insert designation, workpiece material, required profile, and machining conditions. A component drawing is particularly useful for profiling applications because it helps identify the required cutting geometry and nose radius.
Submit your drawing or existing insert reference so our team can review your specifications and help identify a suitable VC-AK configuration.