WNMU080608EN-GM Milling Insert

The WNMU080608EN-GM is a double-sided triangular milling insert with six usable cutting edges and a 0° clearance-angle design. Intended for compatible MFWN milling cutters, it combines a low-cutting-force geometry with a general-purpose roughing chipbreaker for face milling, shoulder milling and side milling. It is suited to machining strategies that use a relatively small cutting depth and high feed.

Product Details

In high-feed roughing, reducing cutting resistance can help manage cutting loads and support stable machining. The WNMU080608EN-GM features a strong positive rake geometry despite its 0° clearance-angle design, helping reduce cutting forces when used with a compatible cutter.

This makes the insert a candidate for roughing strategies that combine a relatively small axial cutting depth with a high feed rate. Actual feed capability depends on the workpiece material, cutter configuration, machine power, workholding and tool overhang.

Six Usable Cutting Edges

The double-sided triangular design provides six usable cutting edges. Using both sides helps make use of the insert before replacement and gives buyers a useful basis for comparing insert cost per cutting edge.

Actual cost efficiency also depends on the selected grade, machining conditions and usable edge life. Consider these factors alongside the number of available edges when evaluating the insert for production work.

Compatible MFWN Milling Applications

The WNMU080608EN-GM is intended for use with compatible MFWN milling cutters. Depending on the cutter design, applications include:

  • Face milling: Roughing flat surfaces and removing material from a workpiece face.
  • Shoulder milling: Machining shoulder features with a compatible cutter geometry.
  • Side milling: Machining side surfaces where supported by the cutter and setup.

Check the exact cutter model and insert-seat compatibility before ordering. The insert designation alone does not guarantee compatibility with every milling cutter.

GM Chipbreaker for General-Purpose Roughing

The GM chipbreaker is intended for general-purpose machining. When selecting an insert for a specific roughing task, consider the workpiece material, cutting depth, feed rate and chip evacuation requirements.

For a small-depth, high-feed strategy, confirm the recommended cutting conditions for the selected insert grade and cutter. Do not apply the same parameters to every material or machine setup.

How to Select the Right Insert Setup

Before choosing the WNMU080608EN-GM, check:

  1. Workpiece material: Identify the material and, where relevant, its hardness.
  2. Cutter model: Confirm that the cutter is designed for this insert.
  3. Roughing strategy: Determine the intended cutting depth and feed rate.
  4. Machine and workholding rigidity: Check whether the setup can support the planned cutting loads.
  5. Insert grade: Choose a grade suited to the workpiece material and operating conditions.

These details help establish whether the insert is appropriate for your application and which grade should be considered.

Request a Quote for WNMU080608EN-GM

Looking for WNMU080608EN-GM inserts for MFWN milling applications? Submit your cutter model, drawings or insert specifications to JimmyTool. Include the workpiece material and intended cutting conditions so compatibility and grade options can be checked before quotation.

Request A Quote

Tell Us What You Need